Core Validators ¶

Yii provides a set of commonly used core validators, found primarily under the yii\validators namespace. Instead of using lengthy validator class names, you may use aliases to specify the use of these core validators. For example, you can use the alias required to refer to the yii\validators\RequiredValidator class:

public function rules()
{
    return [
        [['email', 'password'], 'required'],
    ];
}

The yii\validators\Validator::$builtInValidators property declares all supported validator aliases.

In the following, we will describe the main usage and properties of every core validator.

boolean ¶

[
    // checks if "selected" is either 0 or 1, regardless of data type
    ['selected', 'boolean'],

    // checks if "deleted" is of boolean type, either true or false
    ['deleted', 'boolean', 'trueValue' => true, 'falseValue' => false, 'strict' => true],
]

This validator checks if the input value is a boolean.

• trueValue: the value representing true. Defaults to '1'.
• falseValue: the value representing false. Defaults to '0'.
• strict: whether the type of the input value should match that of trueValue and falseValue. Defaults to false.

Note: Because data input submitted via HTML forms are all strings, you normally should leave the strict property as false.

captcha ¶

[
    ['verificationCode', 'captcha'],
]

This validator is usually used together with yii\captcha\CaptchaAction and yii\captcha\Captcha to make sure an input is the same as the verification code displayed by CAPTCHA widget.

• caseSensitive: whether the comparison of the verification code is case sensitive. Defaults to false.
• captchaAction: the route corresponding to the CAPTCHA action that renders the CAPTCHA image. Defaults to 'site/captcha'.
• skipOnEmpty: whether the validation can be skipped if the input is empty. Defaults to false, which means the input is required.

compare ¶

[
    // validates if the value of "password" attribute equals to that of "password_repeat"
    ['password', 'compare'],

    // same as above but with explicitly specifying the attribute to compare with
    ['password', 'compare', 'compareAttribute' => 'password_repeat'],

    // validates if age is greater than or equal to 30
    ['age', 'compare', 'compareValue' => 30, 'operator' => '>=', 'type' => 'number'],
]

This validator compares the specified input value with another one and make sure if their relationship is as specified by the operator property.

• compareAttribute: the name of the attribute whose value should be compared with. When the validator is being used to validate an attribute, the default value of this property would be the name of the attribute suffixed with _repeat. For example, if the attribute being validated is password, then this property will default to password_repeat.
• compareValue: a constant value that the input value should be compared with. When both of this property and compareAttribute are specified, this property will take precedence.
• operator: the comparison operator. Defaults to ==, meaning checking if the input value is equal to that of compareAttribute or compareValue. The following operators are supported:
  • ==: check if two values are equal. The comparison is done is non-strict mode.
  • ===: check if two values are equal. The comparison is done is strict mode.
  • !=: check if two values are NOT equal. The comparison is done is non-strict mode.
  • !==: check if two values are NOT equal. The comparison is done is strict mode.
  • >: check if value being validated is greater than the value being compared with.
  • >=: check if value being validated is greater than or equal to the value being compared with.
  • <: check if value being validated is less than the value being compared with.
  • <=: check if value being validated is less than or equal to the value being compared with.
• type: The default comparison type is 'string', which means the values are compared byte by byte. When comparing numbers, make sure to set the $type to 'number' to enable numeric comparison.

Comparing date values ¶

The compare validator can only be used to compare strings and numbers. If you need to compare values like dates you have two options. For comparing a date against a fixed value, you can simply use the date validator and specify its $min or $max property. If you need to compare two dates entered in the form, e.g. a fromDate and a toDate field, you can use a combination of compare and date validator like the following:

['fromDate', 'date', 'timestampAttribute' => 'fromDate'],
['toDate', 'date', 'timestampAttribute' => 'toDate'],
['fromDate', 'compare', 'compareAttribute' => 'toDate', 'operator' => '<', 'enableClientValidation' => false],

As validators are executed in the order they are specified this will first validate that the values entered in fromDate and toDate are valid date values and if so, they will be converted into a machine readable format. Afterwards these two values are compared with the compare validator. Client validation is not enabled as this will only work on the server-side because the date validator currently does not provide client validation, so $enableClientValidation is set to false on the compare validator too.

date ¶

The date validator comes with three different shortcuts:

[
    [['from_date', 'to_date'], 'date'],
    [['from_datetime', 'to_datetime'], 'datetime'],
    [['some_time'], 'time'],
]

This validator checks if the input value is a date, time or datetime in a proper format. Optionally, it can convert the input value into a UNIX timestamp or other machine readable format and store it in an attribute specified via timestampAttribute.

• format: the date/time format that the value being validated should be in. This can be a date time pattern as described in the ICU manual. Alternatively this can be a string prefixed with php: representing a format that can be recognized by the PHP Datetime class. Please refer to https://secure.php.net/manual/en/datetime.createfromformat.php on supported formats. If this is not set, it will take the value of Yii::$app->formatter->dateFormat. See the API documentation for more details.

• timestampAttribute: the name of the attribute to which this validator may assign the UNIX timestamp converted from the input date/time. This can be the same attribute as the one being validated. If this is the case, the original value will be overwritten with the timestamp value after validation. See "Handling date input with the DatePicker" for a usage example.

  Since version 2.0.4, a format and timezone can be specified for this attribute using $timestampAttributeFormat and $timestampAttributeTimeZone.

  Note, that when using timestampAttribute, the input value will be converted to a unix timestamp, which by definition is in UTC, so a conversion from the input time zone to UTC will be performed (this behavior can be changed by setting $defaultTimeZone since 2.0.39).

• Since version 2.0.4 it is also possible to specify a minimum or maximum timestamp.

In case the input is optional you may also want to add a default value filter in addition to the date validator to ensure empty input is stored as null. Otherwise you may end up with dates like 0000-00-00 in your database or 1970-01-01 in the input field of a date picker.

[
    [['from_date', 'to_date'], 'default', 'value' => null],
    [['from_date', 'to_date'], 'date'],
],

default ¶

[
    // set "age" to be null if it is empty
    ['age', 'default', 'value' => null],

    // set "country" to be "USA" if it is empty
    ['country', 'default', 'value' => 'USA'],

    // assign "from" and "to" with a date 3 days and 6 days from today, if they are empty
    [['from', 'to'], 'default', 'value' => function ($model, $attribute) {
        return date('Y-m-d', strtotime($attribute === 'to' ? '+3 days' : '+6 days'));
    }],
]

This validator does not validate data. Instead, it assigns a default value to the attributes being validated if the attributes are empty.

• value: the default value or a closure as callback that returns the default value which will be assigned to the attributes being validated if they are empty. The signature of the closure should be as follows,

function foo($model, $attribute) {
    // ... compute $value ...
    return $value;
}

Info: How to determine if a value is empty or not is a separate topic covered in the Empty Values section. Default value from database schema could be loaded via loadDefaultValues() method of the model.

double ¶

[
    // checks if "salary" is a double number
    ['salary', 'double'],
]

This validator checks if the input value is a double number. It is equivalent to the number validator.

• max: the upper limit (inclusive) of the value. If not set, it means the validator does not check the upper limit.
• min: the lower limit (inclusive) of the value. If not set, it means the validator does not check the lower limit.

each ¶

Info: This validator has been available since version 2.0.4.

[
    // checks if every category ID is an integer
    ['categoryIDs', 'each', 'rule' => ['integer']],
]

This validator only works with an array attribute. It validates if every element of the array can be successfully validated by a specified validation rule. In the above example, the categoryIDs attribute must take an array value and each array element will be validated by the integer validation rule.

• rule: an array specifying a validation rule. The first element in the array specifies the class name or the alias of the validator. The rest of the name-value pairs in the array are used to configure the validator object.
• allowMessageFromRule: whether to use the error message returned by the embedded validation rule. Defaults to true. If false, it will use message as the error message.

Note: If the attribute value is not an array, it is considered validation fails and the message will be returned as the error message.

email ¶

[
    // checks if "email" is a valid email address
    ['email', 'email'],
]

This validator checks if the input value is a valid email address.

• allowName: whether to allow name in the email address (e.g. John Smith <john.smith@example.com>). Defaults to false.
• checkDNS, whether to check whether the email's domain exists and has either an A or MX record. Be aware that this check may fail due to temporary DNS problems, even if the email address is actually valid. Defaults to false.
• enableIDN, whether the validation process should take into account IDN (internationalized domain names). Defaults to false. Note that in order to use IDN validation you have to install and enable the intl PHP extension, or an exception would be thrown.

exist ¶

[
    // a1 needs to exist in the column represented by the "a1" attribute
    // i.e. a1 = 1, valid if there is value 1 in column "a1"
    ['a1', 'exist'],
    // equivalent of
    ['a1', 'exist', 'targetAttribute' => 'a1'],
    ['a1', 'exist', 'targetAttribute' => ['a1' => 'a1']],

    // a1 needs to exist, but its value will use a2 to check for the existence
    // i.e. a1 = 2, valid if there is value 2 in column "a2"
    ['a1', 'exist', 'targetAttribute' => 'a2'],
    // equivalent of
    ['a1', 'exist', 'targetAttribute' => ['a1' => 'a2']],
    
    // a2 needs to exist, its value will use a2 to check for the existence, a1 will receive error message
    // i.e. a2 = 2, valid if there is value 2 in column "a2"
    ['a1', 'exist', 'targetAttribute' => ['a2']],
    // equivalent of
    ['a1', 'exist', 'targetAttribute' => ['a2' => 'a2']],

    // a1 and a2 need to exist together, and they both will receive error message
    // i.e. a1 = 3, a2 = 4, valid if there is value 3 in column "a1" and value 4 in column "a2"
    [['a1', 'a2'], 'exist', 'targetAttribute' => ['a1', 'a2']],
    // equivalent of
    [['a1', 'a2'], 'exist', 'targetAttribute' => ['a1' => 'a1', 'a2' => 'a2']],

    // a1 and a2 need to exist together, only a1 will receive error message
    // i.e. a1 = 5, a2 = 6, valid if there is value 5 in column "a1" and value 6 in column "a2"
    ['a1', 'exist', 'targetAttribute' => ['a1', 'a2']],
    // equivalent of
    ['a1', 'exist', 'targetAttribute' => ['a1' => 'a1', 'a2' => 'a2']],

    // a1 needs to exist by checking the existence of both a2 and a3 (using a1 value)
    // i.e. a1 = 7, a2 = 8, valid if there is value 7 in column "a3" and value 8 in column "a2"
    ['a1', 'exist', 'targetAttribute' => ['a2', 'a1' => 'a3']],
    // equivalent of
    ['a1', 'exist', 'targetAttribute' => ['a2' => 'a2', 'a1' => 'a3']],

    // a1 needs to exist. If a1 is an array, then every element of it must exist.
    // i.e. a1 = 9, valid if there is value 9 in column "a1"
    //      a1 = [9, 10], valid if there are values 9 and 10 in column "a1"
    ['a1', 'exist', 'allowArray' => true],
    
    // type_id needs to exist in the column "id" in the table defined in ProductType class
    // i.e. type_id = 1, valid if there is value 1 in column "id" of ProductType's table
    ['type_id', 'exist', 'targetClass' => ProductType::class, 'targetAttribute' => ['type_id' => 'id']],    
    
    // the same as the previous, but using already defined relation "type"
    ['type_id', 'exist', 'targetRelation' => 'type'],
]

This validator checks if the input value can be found in a table column represented by an Active Record attribute. You can use targetAttribute to specify the Active Record attribute and targetClass the corresponding Active Record class. If you do not specify them, they will take the values of the attribute and the model class being validated.

You can use this validator to validate against a single column or multiple columns (i.e., the combination of multiple attribute values should exist).

• targetClass: the name of the Active Record class that should be used to look for the input value being validated. If not set, the class of the model currently being validated will be used.
• targetAttribute: the name of the attribute in targetClass that should be used to validate the existence of the input value. If not set, it will use the name of the attribute currently being validated. You may use an array to validate the existence of multiple columns at the same time. The array values are the attributes that will be used to validate the existence, while the array keys are the attributes whose values are to be validated. If the key, and the value are the same, you can just specify the value.
  Assuming we have ModelA to be validated and ModelB set as the target class the following targetAttribute's configurations are taken as:
  • null => value of a currently validated attribute of ModelA will be checked against stored values of ModelB's attribute with the same name
  • 'a' => value of a currently validated attribute of ModelA will be checked against stored values of attribute "a" of ModelB
  • ['a'] => value of attribute "a" of ModelA will be checked against stored values of attribute "a" of ModelB
  • ['a' => 'a'] => the same as above
  • ['a', 'b'] => value of attribute "a" of ModelA will be checked against stored values of attribute "a" of ModelB and at the same time value of attribute "b" of ModelA will be checked against stored values of attribute "b" of ModelB
  • ['a' => 'b'] => value of attribute "a" of ModelA will be checked against stored values of attribute "b" of ModelB
• targetRelation: since version 2.0.14 you can use convenient attribute targetRelation, which overrides the targetClass and targetAttribute attributes using specs from the requested relation.
• filter: an additional filter to be applied to the DB query used to check the existence of the input value. This can be a string, or an array representing the additional query condition (refer to yii\db\Query::where() on the format of query condition), or an anonymous function with the signature function ($query), where $query is the Query object that you can modify in the function.
• allowArray: whether to allow the input value to be an array. Defaults to false. If this property is true and the input is an array, then every element of the array must exist in the target column. Note that this property cannot be set true if you are validating against multiple columns by setting targetAttribute as an array.

file ¶

[
    // checks if "primaryImage" is an uploaded image file in PNG, JPG or GIF format.
    // the file size must be less than 1MB
    ['primaryImage', 'file', 'extensions' => ['png', 'jpg', 'gif'], 'maxSize' => 1024*1024],
]

This validator checks if the input is a valid uploaded file.

• extensions: a list of file name extensions that are allowed to be uploaded. This can be either an array or a string consisting of file extension names separated by space or comma (e.g. "gif, jpg"). Extension names are case-insensitive. Defaults to null, meaning all file name extensions are allowed.
• mimeTypes: a list of file MIME types that are allowed to be uploaded. This can be either an array or a string consisting of file MIME types separated by space or comma (e.g. "image/jpeg, image/png"). The wildcard mask with the special character * can be used to match groups of mime types. For example image/* will pass all mime types, that begin with image/ (e.g. image/jpeg, image/png). Mime type names are case-insensitive. Defaults to null, meaning all MIME types are allowed. For more details, please refer to common media types.
• minSize: the minimum number of bytes required for the uploaded file. Defaults to null, meaning no lower limit.
• maxSize: the maximum number of bytes allowed for the uploaded file. Defaults to null, meaning no upper limit.
• maxFiles: the maximum number of files that the given attribute can hold. Defaults to 1, meaning the input must be a single uploaded file. If it is greater than 1, then the input must be an array consisting of at most maxFiles number of uploaded files.
• checkExtensionByMimeType: whether to check the file extension by the file's MIME type. If the extension produced by MIME type check differs from the uploaded file extension, the file will be considered as invalid. Defaults to true, meaning perform such check.

FileValidator is used together with yii\web\UploadedFile. Please refer to the Uploading Files section for complete coverage about uploading files and performing validation about the uploaded files.

filter ¶

[
    // trim "username" and "email" inputs
    [['username', 'email'], 'filter', 'filter' => 'trim', 'skipOnArray' => true],

    // normalize "phone" input
    ['phone', 'filter', 'filter' => function ($value) {
        // normalize phone input here
        return $value;
    }],
    
    // normalize "phone" using the function "normalizePhone"
    ['phone', 'filter', 'filter' => [$this, 'normalizePhone']],
    
    public function normalizePhone($value) {
        return $value;
    }
]

This validator does not validate data. Instead, it applies a filter on the input value and assigns it back to the attribute being validated.

• filter: a PHP callback that defines a filter. This can be a global function name, an anonymous function, etc. The function signature must be function ($value) { return $newValue; }. This property must be set.
• skipOnArray: whether to skip the filter if the input value is an array. Defaults to false. Note that if the filter cannot handle array input, you should set this property to be true. Otherwise some PHP error might occur.

Tip: If you want to trim input values, you may directly use the trim validator.

Tip: There are many PHP functions that have the signature expected for the filter callback. For example to apply type casting (using e.g. intval, boolval, ...) to ensure a specific type for an attribute, you can simply specify the function names of the filter without the need to wrap them in a closure:

['property', 'filter', 'filter' => 'boolval'],
['property', 'filter', 'filter' => 'intval'],

image ¶

[
    // checks if "primaryImage" is a valid image with proper size
    ['primaryImage', 'image', 'extensions' => 'png, jpg',
        'minWidth' => 100, 'maxWidth' => 1000,
        'minHeight' => 100, 'maxHeight' => 1000,
    ],
]

This validator checks if the input value represents a valid image file. It extends from the file validator and thus inherits all its properties. Besides, it supports the following additional properties specific for image validation purpose:

• minWidth: the minimum width of the image. Defaults to null, meaning no lower limit.
• maxWidth: the maximum width of the image. Defaults to null, meaning no upper limit.
• minHeight: the minimum height of the image. Defaults to null, meaning no lower limit.
• maxHeight: the maximum height of the image. Defaults to null, meaning no upper limit.

ip ¶

[
    // checks if "ip_address" is a valid IPv4 or IPv6 address
    ['ip_address', 'ip'],

    // checks if "ip_address" is a valid IPv6 address or subnet,
    // value will be expanded to full IPv6 notation.
    ['ip_address', 'ip', 'ipv4' => false, 'subnet' => null, 'expandIPv6' => true],

    // checks if "ip_address" is a valid IPv4 or IPv6 address,
    // allows negation character `!` at the beginning
    ['ip_address', 'ip', 'negation' => true],
]

The validator checks if the attribute value is a valid IPv4/IPv6 address or subnet. It also may change attribute's value if normalization or IPv6 expansion is enabled.

The validator has such configuration options:

• ipv4: whether the validating value can be an IPv4 address. Defaults to true.
• ipv6: whether the validating value can be an IPv6 address. Defaults to true.

• subnet: whether the address can be an IP with CIDR subnet, like 192.168.10.0/24

  • true - the subnet is required, addresses without CIDR will be rejected
  • false - the address can not have the CIDR
  • null - the CIDR is optional

  Defaults to false.

• normalize: whether to add the CIDR prefix with the smallest length (32 for IPv4 and 128 for IPv6) to an address without it. Works only when subnet is not false. For example:

  • 10.0.1.5 will normalized to 10.0.1.5/32
  • 2008:db0::1 will be normalized to 2008:db0::1/128

  Defaults to false.

• negation: whether the validation address can have a negation character ! at the beginning. Defaults to false.
• expandIPv6: whether to expand an IPv6 address to the full notation format. For example, 2008:db0::1 will be expanded to 2008:0db0:0000:0000:0000:0000:0000:0001. Defaults to false.

• ranges: array of IPv4 or IPv6 ranges that are allowed or forbidden.

  When the array is empty, or the option is not set, all the IP addresses are allowed. Otherwise, the rules are checked sequentially until the first match is found. IP address is forbidden, when it has not matched any of the rules.

  For example: `php [

     'client_ip', 'ip', 'ranges' => [
         '192.168.10.128'
         '!192.168.10.0/24',
         'any' // allows any other IP addresses
     ]
  

  ] ` In this example, access is allowed for all the IPv4 and IPv6 addresses excluding 192.168.10.0/24 subnet. IPv4 address 192.168.10.128 is also allowed, because it is listed before the restriction.

• networks: array of network aliases, that can be used in ranges. Format of array:

  • key - alias name
  • value - array of strings. String can be a range, IP address or another alias. String can be negated with ! (independent of negation option).

  The following aliases are defined by default:

  • *: any
  • any: 0.0.0.0/0, ::/0
  • private: 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16, fd00::/8
  • multicast: 224.0.0.0/4, ff00::/8
  • linklocal: 169.254.0.0/16, fe80::/10
  • localhost: 127.0.0.0/8', ::1
  • documentation: 192.0.2.0/24, 198.51.100.0/24, 203.0.113.0/24, 2001:db8::/32
  • system: multicast, linklocal, localhost, documentation

Info: This validator has been available since version 2.0.7.

in ¶

[
    // checks if "level" is 1, 2 or 3
    ['level', 'in', 'range' => [1, 2, 3]],
]

This validator checks if the input value can be found among the given list of values.

• range: a list of given values within which the input value should be looked for.
• strict: whether the comparison between the input value and the given values should be strict (both the type and value must be the same). Defaults to false.
• not: whether the validation result should be inverted. Defaults to false. When this property is set true, the validator checks if the input value is NOT among the given list of values.
• allowArray: whether to allow the input value to be an array. When this is true and the input value is an array, every element in the array must be found in the given list of values, or the validation would fail.

integer ¶

[
    // checks if "age" is an integer
    ['age', 'integer'],
]

This validator checks if the input value is an integer.

• max: the upper limit (inclusive) of the value. If not set, it means the validator does not check the upper limit.
• min: the lower limit (inclusive) of the value. If not set, it means the validator does not check the lower limit.

match ¶

[
    // checks if "username" starts with a letter and contains only word characters
    ['username', 'match', 'pattern' => '/^[a-z]\w*$/i']
]

This validator checks if the input value matches the specified regular expression.

• pattern: the regular expression that the input value should match. This property must be set, or an exception will be thrown.
• not: whether to invert the validation result. Defaults to false, meaning the validation succeeds only if the input value matches the pattern. If this is set true, the validation is considered successful only if the input value does NOT match the pattern.

number ¶

[
    // checks if "salary" is a number
    ['salary', 'number'],
]

This validator checks if the input value is a number. It is equivalent to the double validator.

• max: the upper limit (inclusive) of the value. If not set, it means the validator does not check the upper limit.
• min: the lower limit (inclusive) of the value. If not set, it means the validator does not check the lower limit.

required ¶

[
    // checks if both "username" and "password" are not empty
    [['username', 'password'], 'required'],
]

This validator checks if the input value is provided and not empty.

• requiredValue: the desired value that the input should be. If not set, it means the input should not be empty.
• strict: whether to check data types when validating a value. Defaults to false. When requiredValue is not set, if this property is true, the validator will check if the input value is not strictly null; If this property is false, the validator will use a loose rule to determine a value is empty or not. When requiredValue is set, the comparison between the input and requiredValue will also check data types if this property is true.

Info: How to determine if a value is empty or not is a separate topic covered in the Empty Values section.

safe ¶

[
    // marks "description" to be a safe attribute
    ['description', 'safe'],
]

This validator does not perform data validation. Instead, it is used to mark an attribute to be a safe attribute.

string ¶

[
    // checks if "username" is a string whose length is between 4 and 24
    ['username', 'string', 'length' => [4, 24]],
]

This validator checks if the input value is a valid string with certain length.

• length: specifies the length limit of the input string being validated. This can be specified in one of the following forms:
  • an integer: the exact length that the string should be of;
  • an array of one element: the minimum length of the input string (e.g. [8]). This will overwrite min.
  • an array of two elements: the minimum and maximum lengths of the input string (e.g. [8, 128]). This will overwrite both min and max.
• min: the minimum length of the input string. If not set, it means no minimum length limit.
• max: the maximum length of the input string. If not set, it means no maximum length limit.
• encoding: the encoding of the input string to be validated. If not set, it will use the application's charset value which defaults to UTF-8.

trim ¶

[
    // trims the white spaces surrounding "username" and "email"
    [['username', 'email'], 'trim'],
]

This validator does not perform data validation. Instead, it will trim the surrounding white spaces around the input value. Note that if the input value is an array, it will be ignored by this validator.

unique ¶

[
    // a1 needs to be unique in the column represented by the "a1" attribute
    // i.e. a1 = 1, valid if there is no value 1 in column "a1"
    ['a1', 'unique'],
    // equivalent of
    ['a1', 'unique', 'targetAttribute' => 'a1'],
    ['a1', 'unique', 'targetAttribute' => ['a1' => 'a1']],

    // a1 needs to be unique, but column a2 will be used to check the uniqueness of the a1 value
    // i.e. a1 = 2, valid if there is no value 2 in column "a2"
    ['a1', 'unique', 'targetAttribute' => 'a2'],
    // equivalent of
    ['a1', 'unique', 'targetAttribute' => ['a1' => 'a2']],

    // a1 and a2 need to be unique together, and they both will receive error message
    // i.e. a1 = 3, a2 = 4, valid if there is no value 3 in column "a1" and at the same time no value 4 in column "a2"
    [['a1', 'a2'], 'unique', 'targetAttribute' => ['a1', 'a2']],
    // equivalent of
    [['a1', 'a2'], 'unique', 'targetAttribute' => ['a1' => 'a1', 'a2' => 'a2']],

    // a1 and a2 need to be unique together, only a1 will receive error message
    ['a1', 'unique', 'targetAttribute' => ['a1', 'a2']],

    // a1 needs to be unique by checking the uniqueness of both a2 and a3 (using a1 value)
    // i.e. a1 = 5, a2 = 6, valid if there is no value 5 in column "a3" and at the same time no value 6 in column "a2"
    ['a1', 'unique', 'targetAttribute' => ['a2', 'a1' => 'a3']],
    
    // type_id needs to be unique in the column "id" in the table defined in ProductType class
    // i.e. type_id = 1, valid if there is no value 1 in column "id" of ProductType's table
    ['type_id', 'unique', 'targetClass' => ProductType::class, 'targetAttribute' => 'id'],    
]

This validator checks if the input value is unique in a table column. It only works with Active Record model attributes. It supports validation against either a single column or multiple columns.

• targetClass: the name of the Active Record class that should be used to look for the input value being validated. If not set, the class of the model currently being validated will be used.
• targetAttribute: the name of the attribute in targetClass that should be used to validate the uniqueness of the input value. If not set, it will use the name of the attribute currently being validated. You may use an array to validate the uniqueness of multiple columns at the same time. The array values are the attributes that will be used to validate the uniqueness, while the array keys are the attributes whose values are to be validated. If the key, and the value are the same, you can just specify the value.
  Assuming we have ModelA to be validated and ModelB set as the target class the following targetAttribute's configurations are taken as:
  • null => value of a currently validated attribute of ModelA will be checked against stored values of ModelB's attribute with the same name
  • 'a' => value of a currently validated attribute of ModelA will be checked against stored values of attribute "a" of ModelB
  • ['a'] => value of attribute "a" of ModelA will be checked against stored values of attribute "a" of ModelB
  • ['a' => 'a'] => the same as above
  • ['a', 'b'] => value of attribute "a" of ModelA will be checked against stored values of attribute "a" of ModelB and at the same time value of attribute "b" of ModelA will be checked against stored values of attribute "b" of ModelB
  • ['a' => 'b'] => value of attribute "a" of ModelA will be checked against stored values of attribute "b" of ModelB
• filter: an additional filter to be applied to the DB query used to check the uniqueness of the input value. This can be a string, or an array representing the additional query condition (refer to yii\db\Query::where() on the format of query condition), or an anonymous function with the signature function ($query), where $query is the Query object that you can modify in the function.

url ¶

[
    // checks if "website" is a valid URL. Prepend "http://" to the "website" attribute
    // if it does not have a URI scheme
    ['website', 'url', 'defaultScheme' => 'http'],
]

This validator checks if the input value is a valid URL.

• validSchemes: an array specifying the URI schemes that should be considered valid. Defaults to ['http', 'https'], meaning both http and https URLs are considered to be valid.
• defaultScheme: the default URI scheme to be prepended to the input if it does not have the scheme part. Defaults to null, meaning do not modify the input value.
• enableIDN: whether the validator should take into account IDN (internationalized domain names). Defaults to false. Note that in order to use IDN validation you have to install and enable the intl PHP extension, otherwise an exception would be thrown.

Note: The validator checks that URL scheme and host part is correct. It does NOT check the remaining parts of a URL and is NOT designed to protect against XSS or any other attacks. See Security best practices article to learn more about threats prevention when developing applications.