Type Juggling

PHP does not require explicit type definition in variable declaration. In this case, the type of a variable is determined by the value it stores. That is to say, if a string is assigned to variable $var, then $var is of type string. If afterwards an int value is assigned to $var, it will be of type int.

PHP may attempt to convert the type of a value to another automatically in certain contexts. The different contexts which exist are:

  • Numeric
  • String
  • Logical
  • Integral and string
  • Comparative
  • Function

Note: When a value needs to be interpreted as a different type, the value itself does not change types.

To force a variable to be evaluated as a certain type, see the section on Type casting. To change the type of a variable, see the settype() function.

Numeric contexts

This is the context when using an arithmetical operator.

In this context if either operand is a float (or not interpretable as an int), both operands are interpreted as floats, and the result will be a float. Otherwise, the operands will be interpreted as ints, and the result will also be an int. As of PHP 8.0.0, if one of the operands cannot be interpreted a TypeError is thrown.

String contexts

This is the context when using echo, print, string interpolation, or the string concatenation operator.

In this context the value will be interpreted as string. If the value cannot be interpreted a TypeError is thrown. Prior to PHP 7.4.0, an E_RECOVERABLE_ERROR was raised.

Logical contexts

This is the context when using conditional statements, the ternary operator, or a logical operator.

In this context the value will be interpreted as bool.

Integral and string contexts

This is the context when using bitwise operators.

In this context if all operands are of type string the result will also be a string. Otherwise, the operands will be interpreted as ints, and the result will also be an int. As of PHP 8.0.0, if one of the operands cannot be interpreted a TypeError is thrown.

Comparative contexts

This is the context when using a comparison operator.

The type conversions which occur in this context are explained in the Comparison with Various Types table.

Function contexts

This is the context when a value is passed to a typed parameter, property, or returned from a function which declares a return type.

In this context the value must be a value of the type. Two exceptions exist, the first one is: if the value is of type int and the declared type is float, then the integer is converted to a floating point number. The second one is: if the declared type is a scalar type, the value is convertable to a scalar type, and the coercive typing mode is active (the default), the value may be converted to an accepted scalar value. See below for a description of this behaviour.

Warning

Internal functions automatically coerce null to scalar types, this behaviour is DEPRECATED as of PHP 8.1.0.

Coercive typing with simple type declarations

  • bool type declaration: value is interpreted as bool.
  • int type declaration: value is interpreted as int if the conversion is well-defined. For example the string is numeric.
  • float type declaration: value is interpreted as float if the conversion is well-defined. For example the string is numeric.
  • string type declaration: value is interpreted as string.

Coercive typing with union types

When strict_types is not enabled, scalar type declarations are subject to limited implicit type coercions. If the exact type of the value is not part of the union, then the target type is chosen in the following order of preference:

  1. int
  2. float
  3. string
  4. bool
If the type exists in the union and the value can be coerced to the type under PHP's existing type-checking semantics, then the type is chosen. Otherwise, the next type is tried.
Caution

As an exception, if the value is a string and both int and float are part of the union, the preferred type is determined by the existing numeric string semantics. For example, for "42" int is chosen, while for "42.0" float is chosen.

Note:

Types that are not part of the above preference list are not eligible targets for implicit coercion. In particular no implicit coercions to the null, false, and true types occur.

Example #1 Example of types being coerced into a type part of the union

<?php
// int|string
42 --> 42 // exact type
"42" --> "42" // exact type
new ObjectWithToString --> "Result of __toString()"
// object never compatible with int, fall back to string
42.0 --> 42 // float compatible with int
42.1 --> 42 // float compatible with int
1e100 --> "1.0E+100" // float too large for int type, fall back to string
INF --> "INF" // float too large for int type, fall back to string
true --> 1 // bool compatible with int
[] --> TypeError // array not compatible with int or string

// int|float|bool
"45" --> 45 // int numeric string
"45.0" --> 45.0 // float numeric string

"45X" --> true // not numeric string, fall back to bool
"" --> false // not numeric string, fall back to bool
"X" --> true // not numeric string, fall back to bool
[] --> TypeError // array not compatible with int, float or bool
?>

Type Casting

Type casting converts the value to a chosen type by writing the type within parentheses before the value to convert.

<?php
$foo
= 10; // $foo is an integer
$bar = (bool) $foo; // $bar is a boolean
?>

The casts allowed are:

  • (int) - cast to int
  • (bool) - cast to bool
  • (float) - cast to float
  • (string) - cast to string
  • (array) - cast to array
  • (object) - cast to object
  • (unset) - cast to NULL

Note:

(integer) is an alias of the (int) cast. (boolean) is an alias of the (bool) cast. (binary) is an alias of the (string) cast. (double) and (real) are aliases of the (float) cast. These casts do not use the canonical type name and are not recommended.

Warning

The (real) cast alias has been deprecated as of PHP 8.0.0.

Warning

The (unset) cast has been deprecated as of PHP 7.2.0. Note that the (unset) cast is the same as assigning the value NULL to the variable or call. The (unset) cast is removed as of PHP 8.0.0.

Caution

The (binary) cast and b prefix exists for forward support. Currently (binary) and (string) are identical, however this may change and should not be relied upon.

Note:

Whitespaces are ignored within the parentheses of a cast. Therefore, the following two casts are equivalent:

<?php
$foo
= (int) $bar;
$foo = ( int ) $bar;
?>

Casting literal strings and variables to binary strings:

<?php
$binary
= (binary) $string;
$binary = b"binary string";
?>

Note: Instead of casting a variable to a string, it is also possible to enclose the variable in double quotes.

<?php
$foo
= 10; // $foo is an integer
$str = "$foo"; // $str is a string
$fst = (string) $foo; // $fst is also a string

// This prints out that "they are the same"
if ($fst === $str) {
echo
"they are the same";
}
?>

It may not be obvious exactly what will happen when casting between certain types. For more information, see these sections:

Note: Because PHP supports indexing into strings via offsets using the same syntax as array indexing, the following example holds true for all PHP versions:

<?php
$a
= 'car'; // $a is a string
$a[0] = 'b'; // $a is still a string
echo $a; // bar
?>
See the section titled String access by character for more information.
add a note

User Contributed Notes 7 notes

up
67
Raja
19 years ago
Uneven division of an integer variable by another integer variable will result in a float by automatic conversion -- you do not have to cast the variables to floats in order to avoid integer truncation (as you would in C, for example):

$dividend = 2;
$divisor = 3;
$quotient = $dividend/$divisor;
print $quotient; // 0.66666666666667
up
27
fardelian
11 years ago
Casting objects to arrays is a pain. Example:

<?php

class MyClass {

private
$priv = 'priv_value';
protected
$prot = 'prot_value';
public
$pub = 'pub_value';
public
$MyClasspriv = 'second_pub_value';

}

$test = new MyClass();
echo
'<pre>';
print_r((array) $test);

/*
Array
(
[MyClasspriv] => priv_value
[*prot] => prot_value
[pub] => pub_value
[MyClasspriv] => second_pub_value
)
*/

?>

Yes, that looks like an array with two keys with the same name and it looks like the protected field was prepended with an asterisk. But that's not true:

<?php

foreach ((array) $test as $key => $value) {
$len = strlen($key);
echo
"{$key} ({$len}) => {$value}<br />";
for (
$i = 0; $i < $len; ++$i) {
echo
ord($key[$i]) . ' ';
}
echo
'<hr />';
}

/*
MyClasspriv (13) => priv_value
0 77 121 67 108 97 115 115 0 112 114 105 118
*prot (7) => prot_value
0 42 0 112 114 111 116
pub (3) => pub_value
112 117 98
MyClasspriv (11) => second_pub_value
77 121 67 108 97 115 115 112 114 105 118
*/

?>

The char codes show that the protected keys are prepended with '\0*\0' and private keys are prepended with '\0'.__CLASS__.'\0' so be careful when playing around with this.
up
11
Anonymous
3 years ago
Cast operators have a very high precedence, for example (int)$a/$b is evaluated as ((int)$a)/$b, not as (int)($a/$b) [which would be like intdiv($a,$b) if both $a and $b are integers].
The only exceptions (as of PHP 8.0) are the exponentiation operator ** [i.e. (int)$a**$b is evaluated as (int)($a**$b) rather than ((int)$a)**$b] and the special access/invocation operators ->, ::, [] and () [i.e. in each of (int)$a->$b, (int)$a::$b, (int)$a[$b] and (int)$a($b), the cast is performed last on the result of the variable expression].
up
13
miracle at 1oo-percent dot de
18 years ago
If you want to convert a string automatically to float or integer (e.g. "0.234" to float and "123" to int), simply add 0 to the string - PHP will do the rest.

e.g.

$val = 0 + "1.234";
(type of $val is float now)

$val = 0 + "123";
(type of $val is integer now)
up
12
rmirabelle
13 years ago
The object casting methods presented here do not take into account the class hierarchy of the class you're trying to cast your object into.

/**
* Convert an object to a specific class.
* @param object $object
* @param string $class_name The class to cast the object to
* @return object
*/
public static function cast($object, $class_name) {
if($object === false) return false;
if(class_exists($class_name)) {
$ser_object = serialize($object);
$obj_name_len = strlen(get_class($object));
$start = $obj_name_len + strlen($obj_name_len) + 6;
$new_object = 'O:' . strlen($class_name) . ':"' . $class_name . '":';
$new_object .= substr($ser_object, $start);
$new_object = unserialize($new_object);
/**
* The new object is of the correct type but
* is not fully initialized throughout its graph.
* To get the full object graph (including parent
* class data, we need to create a new instance of
* the specified class and then assign the new
* properties to it.
*/
$graph = new $class_name;
foreach($new_object as $prop => $val) {
$graph->$prop = $val;
}
return $graph;
} else {
throw new CoreException(false, "could not find class $class_name for casting in DB::cast");
return false;
}
}
up
18
Anonymous
21 years ago
Printing or echoing a FALSE boolean value or a NULL value results in an empty string:
(string)TRUE //returns "1"
(string)FALSE //returns ""
echo TRUE; //prints "1"
echo FALSE; //prints nothing!
up
15
ieee at REMOVE dot bk dot ru
12 years ago
There are some shorter and faster (at least on my machine) ways to perform a type cast.
<?php
$string
='12345.678';
$float=+$string;
$integer=0|$string;
$boolean=!!$string;
?>
To Top