<input type="tel">

Despite the fact that inputs of type tel are functionally identical to standard text inputs, they do serve useful purposes; the most quickly apparent of these is that mobile browsers — especially on mobile phones — may opt to present a custom keypad optimized for entering phone numbers. Using a specific input type for telephone numbers also makes adding custom validation and handling of phone numbers more convenient.

The <input> element's value attribute contains a string that either represents a telephone number or is an empty string ("").

In addition to the attributes that operate on all <input> elements regardless of their type, telephone number inputs support the following attributes.

The values of the list attribute is the id of a <datalist> element located in the same document. The <datalist> provides a list of predefined values to suggest to the user for this input. Any values in the list that are not compatible with the type are not included in the suggested options. The values provided are suggestions, not requirements: users can select from this predefined list or provide a different value.

The maximum string length (measured in UTF-16 code units) that the user can enter into the telephone number field. This must be an integer value of 0 or higher. If no maxlength is specified, or an invalid value is specified, the telephone number field has no maximum length. This value must also be greater than or equal to the value of minlength.

The input will fail constraint validation if the length of the text entered into the field is greater than maxlength UTF-16 code units long. Constraint validation is only applied when the value is changed by the user.

The minimum string length (measured in UTF-16 code units) that the user can enter into the telephone number field. This must be a non-negative integer value smaller than or equal to the value specified by maxlength. If no minlength is specified, or an invalid value is specified, the telephone number input has no minimum length.

The telephone number field will fail constraint validation if the length of the text entered into the field is fewer than minlength UTF-16 code units long. Constraint validation is only applied when the value is changed by the user.

The pattern attribute, when specified, is a regular expression that the input's value must match for the value to pass constraint validation. It must be a valid JavaScript regular expression, as used by the RegExp type, and as documented in our guide on regular expressions; the 'u' flag is specified when compiling the regular expression so that the pattern is treated as a sequence of Unicode code points, instead of as ASCII. No forward slashes should be specified around the pattern text.

If the specified pattern is not specified or is invalid, no regular expression is applied and this attribute is ignored completely.

See Pattern validation below for details and an example.

The placeholder attribute is a string that provides a brief hint to the user as to what kind of information is expected in the field. It should be a word or short phrase that demonstrates the expected type of data, rather than an explanatory message. The text must not include carriage returns or line feeds.

If the control's content has one directionality (LTR or RTL) but needs to present the placeholder in the opposite directionality, you can use Unicode bidirectional algorithm formatting characters to override directionality within the placeholder; see How to use Unicode controls for bidi text for more information.

A Boolean attribute which, if present, means this field cannot be edited by the user. Its value can, however, still be changed by JavaScript code directly setting the HTMLInputElement value property.

The size attribute is a numeric value indicating how many characters wide the input field should be. The value must be a number greater than zero, and the default value is 20. Since character widths vary, this may or may not be exact and should not be relied upon to be so; the resulting input may be narrower or wider than the specified number of characters, depending on the characters and the font (font settings in use).

This does not set a limit on how many characters the user can enter into the field. It only specifies approximately how many can be seen at a time. To set an upper limit on the length of the input data, use the maxlength attribute.

The following non-standard attributes are available to telephone number input fields. As a general rule, you should avoid using them unless it can't be helped.

A Safari extension, the autocorrect attribute is a string which indicates whether to activate automatic correction while the user is editing this field. Permitted values are:

on

Enable automatic correction of typos, as well as processing of text substitutions if any are configured.

off

Disable automatic correction and text substitutions.

Telephone numbers are a very commonly collected type of data on the web. When creating any kind of registration or e-commerce site, for example, you will likely need to ask the user for a telephone number, whether for business purposes or for emergency contact purposes. Given how commonly-entered phone numbers are, it's unfortunate that a "one size fits all" solution for validating phone numbers is not practical.

Fortunately, you can consider the requirements of your own site and implement an appropriate level of validation yourself. See Validation, below, for details.

One of the main advantages of <input type="tel"> is that it causes mobile browsers to display a special keyboard for entering phone numbers. For example, here's what the keypads look like on a couple of devices.

Firefox for Android	WebKit iOS (Safari/Chrome/Firefox)

In its most basic form, a tel input can be implemented like this:

<label for="telNo">Phone number:</label>
<input id="telNo" name="telNo" type="tel" />

There is nothing magical going on here. When submitted to the server, the above input's data would be represented as, for example, telNo=+12125553151.

Sometimes it's helpful to offer an in-context hint as to what form the input data should take. This can be especially important if the page design doesn't offer descriptive labels for each <input>. This is where placeholders come in. A placeholder is a value that demonstrates the form the value should take by presenting an example of a valid value, which is displayed inside the edit box when the element's value is "". Once data is entered into the box, the placeholder disappears; if the box is emptied, the placeholder reappears.

Here, we have an tel input with the placeholder 123-4567-8901. Note how the placeholder disappears and reappears as you manipulate the contents of the edit field.

<input id="telNo" name="telNo" type="tel" placeholder="123-4567-8901" />

You can control not only the physical length of the input box, but also the minimum and maximum lengths allowed for the input text itself.

Physical input element size

The physical size of the input box can be controlled using the size attribute. With it, you can specify the number of characters the input box can display at a time. In this example, for instance, the tel edit box is 20 characters wide:

<input id="telNo" name="telNo" type="tel" size="20" />

Element value length

The size is separate from the length limitation on the entered telephone number. You can specify a minimum length, in characters, for the entered telephone number using the minlength attribute; similarly, use maxlength to set the maximum length of the entered telephone number.

The example below creates a 20-character wide telephone number entry box, requiring that the contents be no shorter than 9 characters and no longer than 14 characters.

<input
  id="telNo"
  name="telNo"
  type="tel"
  size="20"
  minlength="9"
  maxlength="14" />

Providing a single default using the value attribute

As always, you can provide a default value for an tel input box by setting its value attribute:

<input id="telNo" name="telNo" type="tel" value="333-4444-4444" />

Offering suggested values

Taking it a step further, you can provide a list of default phone number values from which the user can select. To do this, use the list attribute. This doesn't limit the user to those options, but does allow them to select commonly-used telephone numbers more quickly. This also offers hints to autocomplete. The list attribute specifies the ID of a <datalist> element, which in turn contains one <option> element per suggested value; each option's value is the corresponding suggested value for the telephone number entry box.

<label for="telNo">Phone number: </label>
<input id="telNo" name="telNo" type="tel" list="defaultTels" />

<datalist id="defaultTels">
  <option value="111-1111-1111"></option>
  <option value="122-2222-2222"></option>
  <option value="333-3333-3333"></option>
  <option value="344-4444-4444"></option>
</datalist>

With the <datalist> element and its <option>s in place, the browser will offer the specified values as potential values for the phone number; this is typically presented as a popup or drop-down menu containing the suggestions. While the specific user experience may vary from one browser to another, typically clicking in the edit box presents a drop-down of the suggested phone numbers. Then, as the user types, the list is adjusted to show only filtered matching values. Each typed character narrows down the list until the user makes a selection or types a custom value.

Here's a screenshot of what that might look like:

As we've touched on before, it's quite difficult to provide a one-size-fits-all client-side validation solution for phone numbers. So what can we do? Let's consider some options.

You can make it so that an empty input is invalid and won't be submitted to the server using the required attribute. For example, let's use this HTML:

<form>
  <div>
    <label for="telNo">Enter a telephone number (required): </label>
    <input id="telNo" name="telNo" type="tel" required />
    <span class="validity"></span>
  </div>
  <div>
    <button>Submit</button>
  </div>
</form>

And let's include the following CSS to highlight valid entries with a checkmark and invalid entries with a cross:

div {
  margin-bottom: 10px;
  position: relative;
}

input[type="number"] {
  width: 100px;
}

input + span {
  padding-right: 30px;
}

input:invalid + span::after {
  position: absolute;
  content: "✖";
  padding-left: 5px;
  color: #8b0000;
}

input:valid + span::after {
  position: absolute;
  content: "✓";
  padding-left: 5px;
  color: #009000;
}

The output looks like this:

If you want to further restrict entered numbers so they also have to conform to a specific pattern, you can use the pattern attribute, which takes as its value a regular expression that entered values have to match.

In this example we'll use the same CSS as before, but our HTML is changed to look like this:

<form>
  <div>
    <label for="telNo">
      Enter a telephone number (in the form xxx-xxx-xxxx):
    </label>
    <input
      id="telNo"
      name="telNo"
      type="tel"
      required
      pattern="[0-9]{3}-[0-9]{3}-[0-9]{4}" />
    <span class="validity"></span>
  </div>
  <div>
    <button>Submit</button>
  </div>
</form>

div {
  margin-bottom: 10px;
  position: relative;
}

input[type="number"] {
  width: 100px;
}

input + span {
  padding-right: 30px;
}

input:invalid + span::after {
  position: absolute;
  content: "✖";
  padding-left: 5px;
  color: #8b0000;
}

input:valid + span::after {
  position: absolute;
  content: "✓";
  padding-left: 5px;
  color: #009000;
}

Notice how the entered value is reported as invalid unless the pattern xxx-xxx-xxxx is matched; for instance, 41-323-421 won't be accepted. Neither will 800-MDN-ROCKS. However, 865-555-6502 will be accepted. This particular pattern is obviously only useful for certain locales — in a real application you'd probably have to vary the pattern used depending on the locale of the user.

In this example, we present a simple interface with a <select> element that lets the user choose which country they're in, and a set of <input type="tel"> elements to let them enter each part of their phone number; there is no reason why you can't have multiple tel inputs.

Each input has a placeholder attribute to show a hint to sighted users about what to enter into it, a pattern to enforce a specific number of characters for the desired section, and an aria-label attribute to contain a hint to be read out to screen reader users about what to enter into it.

<form>
  <div>
    <label for="country">Choose your country:</label>
    <select id="country" name="country">
      <option>UK</option>
      <option selected>US</option>
      <option>Germany</option>
    </select>
  </div>
  <div>
    <p>Enter your telephone number:</p>
    <span class="areaDiv">
      <input
        id="areaNo"
        name="areaNo"
        type="tel"
        required
        placeholder="Area code"
        pattern="[0-9]{3}"
        aria-label="Area code" />
      <span class="validity"></span>
    </span>
    <span class="number1Div">
      <input
        id="number1"
        name="number1"
        type="tel"
        required
        placeholder="First part"
        pattern="[0-9]{3}"
        aria-label="First part of number" />
      <span class="validity"></span>
    </span>
    <span class="number2Div">
      <input
        id="number2"
        name="number2"
        type="tel"
        required
        placeholder="Second part"
        pattern="[0-9]{4}"
        aria-label="Second part of number" />
      <span class="validity"></span>
    </span>
  </div>
  <div>
    <button>Submit</button>
  </div>
</form>

The JavaScript is relatively simple — it contains an onchange event handler that, when the <select> value is changed, updates the <input> element's pattern, placeholder, and aria-label to suit the format of telephone numbers in that country/territory.

const selectElem = document.querySelector("select");
const inputElems = document.querySelectorAll("input");

selectElem.onchange = () => {
  for (let i = 0; i < inputElems.length; i++) {
    inputElems[i].value = "";
  }

  if (selectElem.value === "US") {
    inputElems[2].parentNode.style.display = "inline";

    inputElems[0].placeholder = "Area code";
    inputElems[0].pattern = "[0-9]{3}";

    inputElems[1].placeholder = "First part";
    inputElems[1].pattern = "[0-9]{3}";
    inputElems[1].setAttribute("aria-label", "First part of number");

    inputElems[2].placeholder = "Second part";
    inputElems[2].pattern = "[0-9]{4}";
    inputElems[2].setAttribute("aria-label", "Second part of number");
  } else if (selectElem.value === "UK") {
    inputElems[2].parentNode.style.display = "none";

    inputElems[0].placeholder = "Area code";
    inputElems[0].pattern = "[0-9]{3,6}";

    inputElems[1].placeholder = "Local number";
    inputElems[1].pattern = "[0-9]{4,8}";
    inputElems[1].setAttribute("aria-label", "Local number");
  } else if (selectElem.value === "Germany") {
    inputElems[2].parentNode.style.display = "inline";

    inputElems[0].placeholder = "Area code";
    inputElems[0].pattern = "[0-9]{3,5}";

    inputElems[1].placeholder = "First part";
    inputElems[1].pattern = "[0-9]{2,4}";
    inputElems[1].setAttribute("aria-label", "First part of number");

    inputElems[2].placeholder = "Second part";
    inputElems[2].pattern = "[0-9]{4}";
    inputElems[2].setAttribute("aria-label", "Second part of number");
  }
};

The example looks like this:

This is an interesting idea, which goes to show a potential solution to the problem of dealing with international phone numbers. You would have to extend the example of course to provide the correct pattern for potentially every country, which would be a lot of work, and there would still be no foolproof guarantee that the users would enter their numbers correctly.

It makes you wonder if it is worth going to all this trouble on the client-side, when you could just let the user enter their number in whatever format they wanted on the client-side and then validate and sanitize it on the server. But this choice is yours to make.

div {
  margin-bottom: 10px;
  position: relative;
}

input[type="number"] {
  width: 100px;
}

input + span {
  padding-right: 30px;
}

input:invalid + span::after {
  position: absolute;
  content: "✖";
  padding-left: 5px;
  color: #8b0000;
}

input:valid + span::after {
  position: absolute;
  content: "✓";
  padding-left: 5px;
  color: #009000;
}

• HTML forms guide
• <input>
  • <input type="text">
  • <input type="email">
• Compatibility of CSS properties